期刊论文

Experimental study on precision molding of small dual aspherical chalcogenide glass lens

中文

红外与激光工程

1007-2276

2018

47

4

224-232

10.3788/IRLA201847.0418006

国家自然科学基金(51405034) 湖南省自然科学基金(2015JJ3014) 湖南省教育厅项目(15C0039) 湖南省高校重点实验室开放基金(2017kfjj06)。

本校为第一机构

为实现小口径双非球面硫系玻璃镜片的精密模压成型制造, 通过正交模压成型实验, 研究了相关工艺参数对成型镜片质量的影响规律。首先, 介绍了模压成型过程和用于实验的PFLF7-60A型多工位模压成型机床, 并根据非球面曲线公式设计了目标镜片。然后, 选定了一种环保型硫系玻璃IRG205, 通过VFT方程拟合了玻璃粘度与温度之间的关系, 确定了模压温度, 并对各工位实验参数进行了设置。最后, 利用无镀膜模具及球形预形体进行了正交模压成型实验, 分析了实验条件下模压温度、加压载荷及保持压力等成型工艺参数对镜片成型质量(形状精度PV、表面粗糙度Ra及轮廓偏移量)的影响规律, 并获得了优化的成型工艺参...

In order to realize the precision molding of small dual aspherical chalcogenide glass lenses, the influence of the relevant process parameters on the quality of molded lenses was studied by orthogonal molding experiment. Firstly, the molding process and the PFLF7-60A multi-station molding machine were introduced, the target lens was designed according to the aspheric curve formula. Secondly, an environmentally friendly chalcogenide glass IRG205 was selected, and the relationship between the viscosity and temperature of the glass was fitted by t...